Innovators in NDT Technology
WREN TOFD Wedges - Stainless  Steel

High Temperature WREN TOFD Wedges – Stainless Steel

Ideal for use with the WREN Scanner and DTOF transducers. The wedge is designed to withstand 200˚C, however the temperature limit of the transducer must be considered. Includes irrigation and gimbal pin options.

 

  • Contoured wedges available on request

Ask an Expert

Ideal for use with the WREN Scanner and DTOF transducers. The wedge is designed to withstand 200˚C, however the temperature limit of the transducer must be considered. Includes irrigation and gimbal pin options.

 

  • Contoured wedges available on request

Transducers Finder

-Thread Size

-Width x Length (mm)

-Wedge Delay (mm)

-Wedge Delay (µS)

-Emission point (mm from front)

Results 1 - 3 of 3
Product Code Beam Angle Thread Size W x L (mm) (Contact face) Wedge Delay (mm) Wedge Delay (μs) Emission Point
WRENSSI HT 12/45 45° M12 30 x 8.5 10.3 4.20 4
WRENSSI HT 12/60 60° M12 30 x 9 10.0 4.08 4
WRENSSI HT 12/70 70° M12 30 x 9 9.8 4.00 4

Non-standard wedge angles available at additional cost of £40.00 each.
Contoured wedges available at additional cost of £30.00 per wedge or £50.00 per pair.
Wedge delay times measured at 20°C.

Joomla SEF URLs by Artio
Our Customers
CITEC
Alstom
Applus RTD
Network Rail
Apave
Sonomatic
Airbus
Bilfinger
EDF Energy
Comex Nucléaire
Siemens
BAE Systems
SGS
TWI
JF Nuclear
National Nuclear Laboratory
Oceaneering International
Westinghouse
Amec Foster Wheeler
Dalton House,
40 Hardwick Grange,
Warrington,
WA1 4RF U.K.
t: +44 (0) 1925 826 000
f: +44 (0) 1925 838 788
e: office@phoenixisl.com