Innovators in NDT Technology
High Temp TOFD Wedges - Stainless Steel

High Temperature TOFD Wedges – Stainless Steel

Can be used with the full range of Phoenix scanners and DTOF transducers. The material used in this wedge is designed to withstand 200˚C, however the temperature limit of the transducer must be considered. Includes irrigation and gimbal pin options.

  • Contoured wedges available on request
  • Ask an Expert

    Can be used with the full range of Phoenix scanners and DTOF transducers. The material used in this wedge is designed to withstand 200˚C, however the temperature limit of the transducer must be considered. Includes irrigation and gimbal pin options.

  • Contoured wedges available on request
  • Transducers Finder

    -Thread Size

    -Width x Length (mm)

    -Emission point (mm from front)

    Results 1 - 6 of 6
    Product Code Beam Angle Thread Size W x L (mm) (Contact face) Wedge Delay (mm) Wedge Delay (μs) Emission Point
    WTOFSSI HT 12/45 45° M12 30 x 20 7.1 2.90 8
    WTOFSSI HT 12/60 60° M12 30 x 20 7.1 2.90 8
    WTOFSSI HT 12/70 70° M12 30 x 20 7.0 2.86 8
    WTOFSSI HT 20/45 45° M20 30 x 30 8.1 3.31 13
    WTOFSSI HT 20/60 60° M20 30 x 30 7.5 3.06 13
    WTOFSSI HT 20/70 70° M20 30 x 30 7.5 3.06 13

    Non-standard wedge angles available at additional cost of £40.00 each.
    Contoured wedges available at additional cost of £30.00 per wedge or £50.00 per pair.
    Wedge delay times measured at 20°C.

    Joomla SEF URLs by Artio
    Our Customers
    CITEC
    Alstom
    Applus RTD
    Network Rail
    Apave
    Sonomatic
    Airbus
    Bilfinger
    EDF Energy
    Comex Nucléaire
    Siemens
    BAE Systems
    SGS
    TWI
    JF Nuclear
    National Nuclear Laboratory
    Oceaneering International
    Westinghouse
    Amec Foster Wheeler
    Dalton House,
    40 Hardwick Grange,
    Warrington,
    WA1 4RF U.K.
    t: +44 (0) 1925 826 000
    f: +44 (0) 1925 838 788
    e: office@phoenixisl.com