Innovators in NDT Technology
step-wedges

Step Wedges

Step Wedges are not covered by any EN standard, however Phoenix step wedges are manufactured to Material Specification of BSEN 12223:2000 and each step wedge is engraved with a unique serial number.

Quality Assurance

  • A full independent NAMAS/UKAS approval for physical measurements is offered, if required (price on application).
  • Material reports also available on request.
  • Ask an Expert

    Step Wedges are not covered by any EN standard, however Phoenix step wedges are manufactured to Material Specification of BSEN 12223:2000 and each step wedge is engraved with a unique serial number.

    Quality Assurance

  • A full independent NAMAS/UKAS approval for physical measurements is offered, if required (price on application).
  • Material reports also available on request.
  • Transducers Finder

    Results 1 - 10 of 10
    Product Code Description Material
    LSW 1-8mm Carbon Steel
    LSW 1-8mm Carbon Steel

    8 steps from 1mm to 8mm
    Pad size: 15mm
    Includes case

    Carbon Steel
    LSW 1-8mm Aluminum
    LSW 1-8mm Aluminum

    8 steps from 1mm to 8mm
    Pad size: 15mm
    Includes case

    Aluminum
    LSW 1-8mm Stainless Steel
    LSW 1-8mm Stainless Steel

    8 steps from 1mm to 8mm
    Pad size: 25mm
    Includes case

    Stainless Steel
     
    LSW 4-20
    LSW 4-20

    4 steps at 5, 10, 15, 20mm
    Pad size: 20mm

    Carbon Steel Stainless Steel Aluminum
    LSW 4-25
    LSW 4-25

    4 steps at 5, 10, 15, 20mm
    Pad size: 25mm

    Carbon Steel Stainless steel
     
    LSW 1-10
    LSW 1-10

    10 steps at 1mm
    Pad size: 15mm

    Carbon Steel Stainless steel
    LSW 2-20
    LSW 2-20

    10 steps at 2mm
    Pad size: 20mm

    Carbon Steel
     
    LSW 5-25
    LSW 5-25

    5 steps at 5, 10, 15, 20, 25mm
    Pad size: 20mm

    Carbon Steel Stainless Steel Aluminium
    LSW 1.5-20 Perspex holder
    LSW 1.5-20 Perspex holder

    6 steps at 1.5, 2.5, 5, 10, 15, 20mm
    Inserts: 25mm diameter

    Mild Steel
     
    CSW - Curved Step Wedge
    CSW - Curved Step Wedge

    5 steps at 2, 4, 6, 8, 10mm for time base calibration
    of thickness measuring probes

    Carbon Steel

    Note: Rugged fabric carry cases are included where indicated.

    Our Customers
    CITEC
    Alstom
    Applus RTD
    Network Rail
    Apave
    Sonomatic
    Airbus
    Bilfinger
    EDF Energy
    Comex Nucléaire
    Siemens
    BAE Systems
    SGS
    TWI
    JF Nuclear
    National Nuclear Laboratory
    Oceaneering International
    Westinghouse
    Amec Foster Wheeler
    Dalton House,
    40 Hardwick Grange,
    Warrington,
    WA1 4RF U.K.
    t: +44 (0) 1925 826 000
    f: +44 (0) 1925 838 788
    e: office@phoenixisl.com