Innovators in NDT Technology
calibration-blocks

Calibration Blocks

All calibration blocks are engraved with a unique serial number and certified to the applicable standard. All blocks are supplied with a calibration certificate.


Quality Assurance

  • Each block is engraved with a unique serial number and fully certified to the applicable standard
  • A full independent NAMAS/UKAS approval for physical measurements is offered, if required (price on application)
  • Material reports are available but must be requested at the point of ordering
  • Ask an Expert

    All calibration blocks are engraved with a unique serial number and certified to the applicable standard. All blocks are supplied with a calibration certificate.


    Quality Assurance

  • Each block is engraved with a unique serial number and fully certified to the applicable standard
  • A full independent NAMAS/UKAS approval for physical measurements is offered, if required (price on application)
  • Material reports are available but must be requested at the point of ordering
  • Transducers Finder

    Results 1 - 18 of 18
    Product Code Description Specification Size (mm)
    BLOCK NO 1

    Calibration standard for the calibration of shear and compression wave probes, time base and sensitivity settings, verification of beam angle, emission point, resolution, 3mm Ø target hole. Includes case. (Stainless Steel and Aluminium conform dimensionally to EN ISO 2400:2012).

    EN ISO 2400 2012 25 x 100 x 300 (weight 6.2kgs) Carbon Steel Stainless Steel Aluminium
    BLOCK NO 1 50mm THICK
    BLOCK NO 1

    Calibration standard for the calibration of shear and compression wave probes, time base and sensitivity settings, verification of beam angle, emission point, resolution, 3mm Ø target hole. Includes case.

    EN ISO 2400 2012 50 x 100 x 300 (weight 9.6kgs) Carbon Steel
     
    V1 (A2)
    V1 (A2)

    V1 (A2) Calibration standard for the calibration of shear and compression wave probes, time base and sensitivity settings, verification of beam angle, emission point, resolution, 1.5mm Ø target hole. Includes case. (Compliant with EN ISO 2400:2012).

    BS2704 25 x 100 x 300 (weight 6.2kgs) Carbon Steel Stainless Steel Aluminium
    V1 (A2) 50mm THICK
    V1 (A2)

    V1 (A2) Calibration standard for the calibration of shear and compression wave probes, time base and sensitivity settings, verification of beam angle, emission point, resolution, 1.5mm Ø target hole. Includes case. (Compliant with EN ISO 2400:2012).

    BS2704 50 x 100 x 300 (weight 9.6kgs)
    Carbon Steel
     
    BLOCK NO 2
    BLOCK NO 2

    Miniature calibration block for site checking of shear wave probes, verification of beam angles, calibration of time base and sensitivity settings with 5mm Ø target hole. Includes case. (Stainless Steel and Aluminium conform dimensionally to EN ISO 7963:2010).

    EN ISO 7963 2010 12.5 Thick Carbon Steel Stainless Steel Aluminium
    V2/12/5 (A4)
    V2/12/5

    V2/12.5 (A4) Miniature calibration block for site checking of shear wave probes, verification of beam angles, calibration of time base and sensitivity settings with 1.5mm Ø target hole. Includes case. (Compliant with EN ISO 7963:2010).

    BS2704 12.5 Thick Carbon Steel Stainless Steel Aluminium
    BLOCK NO 2 20mm THICK
    BLOCK NO 2

    20mm Thick miniature calibration block with 5mm Ø target hole. For site checking of shear wave probes, verification of beam angles, calibration of time base and sensitivity settings. The thicker 20mm block reduces side wall echoes. Includes case. (Stainless Steel and Aluminium conform dimensionally to EN ISO 7963:2010).

    EN ISO 7963 2010 20 Thick Carbon Steel Stainless Steel Aluminium
    V2/20 (A4)
    V2/20 (A4) Image

    20mm Thick miniature calibration block with 1.5mm Ø target hole. For site checking of shear wave probes, verification of beam angles, calibration of time base and sensitivity settings. The thicker 20mm block reduces side wall echoes. Includes case. (Compliant with EN IS0 7963:2010).

    BS2704 20 Thick Carbon Steel Stainless Steel Aluminium
    BCB IOW (A5)
    BCB IOW (A5)

    Beam calibration block for beam profile measurement and resolution checks for shear wave probes, also sensitivity levels for shear and compression probes. 9 x 1.5mm Ø target holes. Includes case.

    BS2704 50 x 75 x 305
     
    A6
    A6

    For checking the dominant frequency of compression wave probes, the pulse length dead zone and resolving power for both shear and compression wave probes as per BS4331 Part 3 1974. (1987).

    BS2704 25 x 50 x 150
    A7 (RTB)
    A7 (RTB)

    Resolution Block for checking shear wave probe resolution as per BS4331 Part 3 1974. 4 steps at 2, 3, 4 and 5mm.

    - 74 radius x 75 thick (4kg)
     
    BTB
    BTB

    Contoured Boiler Tube Calibration Block (BTB) – boiler tube block for calibrating low profile PA probes for use with Bracelet scanner, 3 x 1.5mm dia SDH and contoured for 1.9" OD (1.5" NPS) (other contours available incl. 2" / 2.5" / 3" / 3.5" / 4" NPS).

    3 x 1.5mm dia SDH 25 x 20 x 165 (0.6kg)
    BTB
    BTB Image

    BTB as above with 5 x 1.5mm dia SDH

    5 x 1.5mm dia SDH 25 x 20 x 165 (0.6kg)
    BTB
    BTB Image

    BTB as above with 5 x 1mm dia SDH

    5 x 1mm dia SDH 25 x 20 x 165 (0.6kg)
    Rail Block CB87
    Rail Block CB87

    Calibration block for the Rail industry. Includes certificate and wallet.

    - -
    Rail Block CB91
    Rail Block CB91

    Calibration block for the Rail industry. Includes certificate.

    - -
    Flat Phased Array Test Block
    Flat Phased  Array Test  Block

    Flat phased array calibration block for calibrating TCG, sensitivity, velocity and wedge delay. Includes case.

    3 x 1.5mm SDH -
    Contoured Phased Array Test Block
    Contoured  Phased Array Test Block

    Contoured phased array calibration block for calibrating TCG, sensitivity, velocity and wedge delay.Contour to be advised by customer. Includes case.

    3 x 1.5mm SDH -
    Our Customers
    CITEC
    Alstom
    Applus RTD
    Network Rail
    Apave
    Sonomatic
    Airbus
    Bilfinger
    EDF Energy
    Comex Nucléaire
    Siemens
    BAE Systems
    SGS
    TWI
    JF Nuclear
    National Nuclear Laboratory
    Oceaneering International
    Westinghouse
    Amec Foster Wheeler
    Dalton House,
    40 Hardwick Grange,
    Warrington,
    WA1 4RF U.K.
    t: +44 (0) 1925 826 000
    f: +44 (0) 1925 838 788
    e: office@phoenixisl.com