Phoenix ISL phased array wedges are precision manufactured from rexolite® and available to order in a range of different angles. All wedges can be contoured to your specification. Suitable for use with Phoenix linear phased array probes, tool posts and cradles.

Wedges include:

  • Irrigation
  • Mounting holes
  • Wear pins (to increase wear resistance)

Phased Array Wedge Product Codes

Product Code Velocity

(m/s)

Front Height
H1
(mm)
Rear Height
H2
(mm)
Height to El.1
H3
(mm)
Length

L1
(mm)

Length to El.1
L2
(mm)
Length to Damping
L3
(mm)
Width (W)

(mm)

Wedge Angle

(°)

Wave Type Angle° in C/Steel
WPA-W20-55S-IMW 2330 15.50 3.62 7.00 25.00 4.7 4.0 40.0 36.1 Shear 55
WPA-W30-55S-IMW 2330 32.00 11.33 16.00 49.00 6.4 4.0 40.0 36.1 Shear 55
WPA-W40-55S-IMW 2330 33.50 6.27 11.00 62.00 6.4 4.0 40.0 36.1 Shear 55
WPA-W70-55S-IMW 2330 47.50 4.18 8.20 82.00 5.5 4.0 40.0 36.1 Shear 55
WPA-W20-0L-IMW 2330 20.00 20.00 20.00 25.00 8.0 40.0 0 Long 0
WPA-W30-0L-IMW 2330 20.00 20.00 20.00 49.00 15.2 40.0 0 Long 0
WPA-W40-0L-IMW 2330 20.00 20.00 20.00 62.00 15.5 40.0 0 Long 0
WPA-W70-0L-IMW 2330 20.00 20.00 20.00 82.00 11.5 40.0 0 Long 0
Bracelet Wedges(contoured) Available for pipes ranging from 0.5” – 8” NPS . Please contact our Sales team to order.
  • Other specification phased array wedges available on request. See product code generator below.
  • Wedges can be contoured to suit any surface profile – Diameter and direction must be stated on order.

Request a Quote