Twin Crystal Angled Compression Wave Transducers

TAC probes can be used on a wide range of materials. They offer improved resolution and signal-to-noise ratio when inspecting coarse-grained and attenuative materials due to the in-built focussing of the probes.

  • Standard TAC probes are designed for use on carbon steel. If inspecting other materials please state this when placing an order.
  • Other focal depths and frequencies available on request

 

Supplied with:

  • Top entry Lemo 00 connectors
  • Certificate of Individual Parameters (pre-contouring)
Product Code Frequency MHz Angle A° Crystal Size (mm) Probe Size L x W x H (mm) Focal depth (mm) Connector
TAC F/A/25 42 70,60,45 2 (6 x 13) 25 x 25 x 25 12 Lemo 00
TAC F/A/30 42 70,60,45 2 (6 x 13) 30 x 30 x 28 18 Lemo 00

Note: Non-standard frequencies, angles, focus and probes for other material velocities available for an additional £50 per probe. Contouring available per probe – £50

  • Probe dimensions supplied exclude connectors, gimbal pins and couplant nozzles
  • Probe diameter measurements are to the widest point
  • Contouring available per probe (please specify relative to beam direction)
  • Please refer here for transducer certificate and document options
  • Technical datasheets available free of charge upon request, for certain transducers across the range

Request a Quote