All calibration blocks are engraved with a unique serial number and certified to the applicable standard. All blocks are supplied with a calibration certificate.

Quality Assurance

  • Each block is engraved with a unique serial number and fully certified to the applicable standard
  • A full independent NAMAS/UKAS approval for physical measurements is offered, if required (price on application)
  • Material reports are available but must be requested at the point of ordering.
Item No. Product Code Description Specification Size (mm)
1 BLOCK NO 1
Calibration standard for the calibration of shear and compression wave probes, time base and sensitivity settings, verification of beam angle, emission point, resolution, 3mm Ø target hole. Includes case. (Stainless Steel and Aluminium conform dimensionally to EN ISO 2400:2012). EN ISO 2400 2012 (weight 6.2kgs)
25 x 100 x 300
Aluminium
Stainless Steel
Carbon Steel
2 BLOCK NO 1 50mm THICK
Calibration standard for the calibration of shear and compression wave probes, time base and sensitivity settings, verification of beam angle, emission point, resolution, 3mm Ø target hole. Includes case. EN ISO 2400 2012 50 x 100 x 300 (weight 9.6kgs) Carbon Steel
3 V1 (A2)
V1 (A2) Calibration standard for the calibration of shear and compression wave probes, time base and sensitivity settings, verification of beam angle, emission point, resolution,1.5mm Ø target hole. Includes case. (Compliant with EN ISO 2400:2012). BS2704 (weight 6.2kgs)
25 x 100 x 300
Aluminium
Stainless Steel
Carbon Steel
4 V1 (A2) 50mm THICK
V1 (A2) Calibration standard for the calibration of shear and compression wave probes, time base and sensitivity settings, verification of beam angle, emission point, resolution,1.5mm Ø target hole. Includes case. (Compliant with EN ISO 2400:2012). BS2704 50 x 100 x 300 (weight 9.6kgs) Carbon Steel
5 BLOCK NO 2
Miniature calibration block for site checking of shear wave probes, verification of beam angles, calibration of time base and sensitivity settings with 5mm Ø target hole. Includes case. (Stainless Steel and Aluminium conform dimensionally to EN ISO 7963:2010). EN ISO 7963 2010 12.5 Thick
Aluminium
Stainless Steel
Carbon Steel
6 V2/12/5 (A4)
V2/12.5 (A4) Miniature calibration block for site checking of shear wave probes, verification of beam angles, calibration of time base and sensitivity settings with 1.5mm Ø target hole. Includes case. (Compliant with EN ISO 7963:2010). BS2704 12.5 Thick
Aluminium
Stainless Steel
Carbon Steel
7 BLOCK NO 2 20mm THICK
20mm Thick miniature calibration block with 5mm Ø target hole. For site checking of shear wave probes, verification of beam angles, calibration of time base and sensitivity settings. The thicker 20mm block reduces side wall echoes. Includes case. (Stainless Steel and Aluminium conform dimensionally to EN ISO 7963:2010). EN ISO 7963 2010 Aluminium
Stainless Steel
Carbon Steel
20 Thick
8 V2/20 (A4)
20mm Thick miniature calibration block with 1.5mm Ø target hole. For site checking of shear wave probes, verification of beam angles, calibration of time base and sensitivity settings. The thicker 20mm block reduces side wall echoes. Includes case. (Compliant with EN IS0 7963:2010). BS2704 12.5 Thick
Aluminium
Stainless Steel
Carbon Steel
9 BCB IOW (A5)
Beam calibration block for beam profile measurement and resolution checks for shear wave probes, also sensitivity levels for shear and compression probes. 9 x 1.5mm Ø target holes. Includes case. BS2704 50 x 75 x 305
10 A6
For checking the dominant frequency of compression wave probes, the pulse length dead zone and resolving power for both shear and compression wave probes as per BS4331 Part 3 1974. (1987). BS2704 25 x 50 x 150
11 A7 (RTB)
Resolution Block for checking shear wave probe resolution as per BS4331 Part 3 1974. 4 steps at 2, 3, 4 and 5mm. 74 radius x 75 thick (4kg)
12 BTB
Contoured Boiler Tube Calibration Block (BTB) – boiler tube block for calibrating low profile PA probes for use with Bracelet scanner, 3 x 1.5mm dia SDH and contoured for 1.9″ OD (1.5″ NPS) (other contours available incl. 2″ / 2.5″ / 3″ / 3.5″ / 4″ NPS). 3 x 1.5mm dia SDH (0.6kg)
25 x 20 x 165
13 BTB
BTB as above with 5 x 1.5mm dia SDH 5 x 1.5mm dia SDH (0.6kg)
25 x 20 x 165
14 BTB
BTB as above with 5 x 1mm dia SDH 5 x 1mm dia SDH (0.6kg)
25 x 20 x 165
15 Rail Block CB87
Calibration block for the Rail industry. Includes certificate and wallet.
16 Rail Block CB91
Calibration block for the Rail industry. Includes certificate.
17 Flat Phased Array Test Block
Flat phased array calibration block for calibrating TCG, sensitivity, velocity and wedge delay. Includes case. 3 x 1.5mm SDH
18 Contoured Phased Array Test Block
Contoured phased array calibration block for calibrating TCG, sensitivity, velocity and wedge delay.Contour to be advised by customer. Includes case. 3 x 1.5mm SDH

Request a Quote